Inserting Cues - ETC Expression 2.0 User Manual

Chapter 4 Learning the basics

Inserting cues

You may want to insert a cue between recorded cues . For example, you
may want to modify cue 1 slightly and insert it between cues 1 and 2 .
You can number cues with a one-digit decimal . Therefore, you can insert
up to nine cues between one and two (1.1, 1.2, etc.) . To modify and
insert a cue, follow these steps:
1. Press [Blind] . Expression automatically prompts you for a cue
number.
2. Enter cue number you want to modify.
3. Make modifications.
4. Press [Rec].
5. Enter cue number with a decimal to insert it between cues . If you do
not enter a new cue number, you will overwrite the existing cue.
6. Press [Enter].
Insert cue keystrokes:
Key
[Blind]
[1]
[Chan] [1][0]
[Thru] [1][5],
fader wheel
[Rec]
[1] [.] [1]
[Enter]
Action
Displays Blind mode screen.
Displays cue 1.
Modifies cue.
Indicates you want to record cue.
Enters cue number 1.1.
Records and inserts cue 1.1 between cues 1 and 2.
4 - 21