ETC Expression 2.0 User Manual page 142

5 - 38
6. Press [Cue Select] . The following line appears at the top of the
screen.
CUE CROSSFADE TO 100% UP 00:00 DOWN 00:00 DELAY 00:00
7. Enter cue number you want for step one and press [Enter]. Cursor
moves to Upfade field.
8. Enter an upfade time from .1 seconds to 99:59 minutes, then press
[Enter]. Cursor moves to downfade field.
9. Enter downfade time from .1 seconds to 99:59 minutes, then press
[Enter].
10. Enter delay time from .1 seconds to 99:59 minutes, then press
[Enter]. Delay time is the time between the start of one cue and the
start of the next.
11. Repeat steps 6 through 10 to add cues as subroutine steps.
12. Press [Style] to select a subroutine style. Styles are defined below.
When subroutine runs, Expression plays back each step in the
sequence, as you have programmed up, down and delay times.
When the subroutine reaches a style step, the style you select
instructs the subroutine which step to play back next.
1 - Loop . Runs through preceding cues and then returns to first cue .
Enter the number of times you want the loop to return to the top of
the cue list . If you enter 5, the sequence will play 6 times . Enter 0
for a continuous loop.
2 - Bounce . Runs though preceding cues then plays them in reverse
order . One bounce equals running through the sequence forward
once and reverse once . Enter 0 for a continuous bounce.
3 - Jump-to-cue . Links subroutine to another cue or subroutine .
Enter the number of the cue to link to.
4 - Hold for Go . Forces subroutine to pause until [Go] is pressed.
Expression 2.0