Submaster Pages - ETC Expression 2.0 User Manual

4 - 38 Expression 2.0

Submaster pages

Expression has two pages of submasters . Each page can hold a full set
of recorded submasters, one in each pot . This doubles the number of
recorded submasters available.
Expression displays the message Page 1 Loaded (or Page 2 Loaded) in
the Page Display window to indicate which page is currently active . To
switch pages, press [Page]; enter the page number you want, and press
[Enter].
The message indicates the new page number and displays the message
Loading instead of Loaded .
When you load a new page, any submasters set at a level above zero
remain on stage until you pull them down to zero . This prevents the
stage from going black when you switch pages . Submasters remaining
from the previous page are indicated by flashing bump switch LEDs .
Submasters on the new page are not loaded into pots until you pull them
down to zero . The message Loading remains on the screen until all
submasters on the new page are loaded .
Note: When you read a new show into the console from a disk, the
console loads the same page number that was loaded from the previous
show.
If any submasters are on stage when you read a new show into the
console, they will remain on stage until you pull pots down to zero.
Submaster LEDs flash to indicate that the associated submaster levels
are not from the currently loaded page.