Entering System Configuration - ETC Expression 2.0 User Manual

2 - 6

Entering system configuration

When you install your Expression , you have two system configuration
options to set: monitor selection and boot option selection .
Expression retains these settings until you change them, you perform a
diagnostic system clear, or the memory is corrupted.
Monitor selection
To configure your system for the type of monitor you have, follow these
steps:
1. Press [Set Up] to display the Set Up Menu.
2. Select 6, System Settings, and press [Enter].
3. Select 11, Color/monochrome monitor, and press [Enter] .
4. Select either 0 for a monochrome or grayscale monitor, or 1 for a
color monitor.
5. Press [Enter].
Note: Some monitors may not be compatible with the console or may
need special adjustment. If the picture breaks up, rolls or is not fully
shown, check with your dealer for compatibility.
Expression 2.0