Chapter 4 Learning the basics
Viewing cues
Once you have created a few cues, you may want to look at them . You
can view stored cues in two ways, live in Stage mode, or just on the
screen in Blind mode.
To view cues live, you must select the cue and play it back in a fader,
see Lesson 3: Playing back cues for instructions.
To view a cue just on the screen, select Blind mode and enter the cue
number you want . To view a different cue, press [Cue] and the new cue
number that you want to see .
In Blind mode you can also use [+] and [-] to move through recorded
cues, and cue parts, one at a time . Press [Cue]; thereafter [+] displays
the next cue or part, and [-] displays the previous cue or part.
4 - 23
Need help?
Do you have a question about the Expression 2.0 and is the answer not in the manual?