ETC Expression 2.0 User Manual page 219

Chapter 8 Reference
Selecting cues in Track Sheet
To select cues while in Track Sheet, follow these steps:
1. Press [Cue].
2. Enter cue numbers and [And] or [Thru] to enter a group of cues.
Example
[Track Sheet] [Cue] [1] [Thru] [5] selects cues 1 through 5 from the Track
Sheet.
Numbering cues
Expression has a 400 cue limit per show . However, you can number
cues from .1 to 999.9, using up to one decimal place.
Naming cues
Expression's expanded memory features an optional alphanumeric
keyboard option. With the keyboard, you can name cues, submasters,
groups, and shows. Follow these steps to use the keyboard to assign a
name to a cue:
1. Make sure the keyboard is properly connected. See instructions in
Chapter 2, Installation.
2. Press [Stage] or [Blind].
3. Press [Cue], then enter the number of the cue you want to name.
4. Press [F1] on the keyboard, then enter the desired cue name. See
Chapter 7, Accessories, page 7 - 3 for more information on naming
conventions.
5. Press [Enter] on the keyboard to record the name.
6. Press [Esc] on the keyboard to quit and return to the original display
screen.
8 - 19