Effects Shortcuts - ETC Expression 2.0 User Manual

Chapter 5 Learning advanced techniques 5 - 35

Effects shortcuts

Expression assumes you want to organize channels in a pattern . There-
fore, you can enter the numbers of steps and channel numbers you
want, and create all your steps at once.
To create all your steps at once, press [Step/Part] [1] [Thru], and then
enter the total number of steps you want . Then select all the channels
you want in the effect by pressing [Chan] and the channel numbers you
want in conjunction with [Thru] and [And].
Expression assigns channels to steps numerically until it reaches the last
step; the next channel is assigned to the first step and so on until all
channels are assigned.
For example, if you select steps 1 through 10, and then select channels
1 through 60, Expression assigns channels as illustrated below.
All your steps will still be selected . When you enter high and low levels
and delay time, all selected steps are affected . Remember that you can,
but don't have to, enter up to 10 channels per step.
You can also select a range of steps by pressing [Step/Part] and then
entering step numbers with [Thru] and [And].