System Setting Options - ETC Expression 2.0 User Manual

Chapter 8 Reference

System setting options

Default full level
Default up/down fade times
Default fader clear time
Customize channels
Select MIDI channel
Level/proportional rate
override
Customize dimmers
Default softpatch
Default dimmer profiles
Serial/parallel printer
Color/monochrome monitor
Fast/full boot test
Enable/disable remote
submasters
Enable/disable bump switches Chapter 3, Entering softpatch and system settings,
Enable/disable Infrared
Remote Focus Unit
Diagnostic system clear
Designer's Worksheet options Chapter 2, Installation, page 2 - 15 .
Enable/disable Flexichannel
Chapter 3, Entering softpatch and system settings,
page 3 - 14.
Chapter 3, Entering softpatch and system settings,
page 3 - 14.
Chapter 3, Entering softpatch and system settings,
page 3 - 15.
Chapter 3, Entering softpatch and system settings,
page 3 - 3 .
Chapter 7, Accessories, page 7 - 15.
Chapter 4, Learning the basics, page 4 - 30.
Chapter 3, Entering softpatch and system settings,
page , 3 - 3 and 3 - 5 .
Chapter 3, Entering softpatch and system settings,
page 3 - 3 .
Chapter 3, Entering softpatch and system settings,
page 3 - 10 .
Chapter 2, Installation, page 2 - 10 .
Chapter 2, Installation, page 2 - 6.
Chapter 2, Installation, page 2 - 7 .
Chapter 7, Accessories, page 2 - 20 .
page 3 - 15 .
Chapter 7, Accessories, page 2 - 19 .
Chapter 8, Reference, page 8 -21 .
Chapter 7, Accessories, page 3 - 16 .
8 - 67