Editing A Multipart Cue - ETC Expression 2.0 User Manual

Chapter 5 Learning advanced techniques

Editing a multipart cue

Once you have created a multipart cue, you can add or delete channels
from the parts, change channel levels, or change fade and wait times.
Adding, deleting and modifying channels
Follow these steps to make changes to a multipart cue:
1. Press [Blind]. Expression displays the Blind mode screen. The [Cue]
LED lights, prompting you to enter a cue number.
2. Enter the cue number.
3. Press [Step/Part]; then press [+] or [-] until the part you want to edit
is displayed.
Note: When you initially display a multipart cue, the channels that
are tracking from the previous cue are displayed in green; those that
are at new levels are displayed in blue. When you press [Step/Part]
to display a part, channels that make up the selected part are
displayed in blue; channels that make up other parts of the multipart
cue are displayed in green.
4. Press [Chan], and select the channels you want to modify.
To add channels
Set intensity by level of new channels by pressing [At] and
entering a two-digit level, moving the fader wheel, or pressing
[+] and [-].
To delete channels
Set channel levels to zero by pressing [At] [0] [0].
To change level settings
Set new intensity level by pressing [At] and entering a two-digit
level, moving the fader wheel, or pressing [+] and [-].
5. Press [Rec] [Enter] to record the modified part.
5 - 7