Deleting Submasters - ETC Expression 2.0 User Manual

Chapter 4 Learning the basics 4 - 47

Deleting submasters

You must be in Blind to delete individual submasters . To delete all
submasters and all other show information, you can use the Set Up
Menu option Diagnostic system clear. It is described on page 8 - 21.
To delete submasters, follow these steps:
1. Press [Blind] and then [Sub] .
2. Enter submaster number you want to delete.
3. Press [Clear] .
4. Press [Rec] to delete the submaster or [Clear] to cancel the action.