ETC Expression 2.0 User Manual page 118

5 - 14
When you insert a cue with [Track] new channels track through the cues
after it until Expression encounters a cue with a level previously re-
corded for that channel.
Pressing [Track] (rather than [Rec] as in the previous example) then
[1][.][1] [Enter] to insert and record the same cue 1.1 as above produces
the results illustrated in Figure 5 . Compare it to the results illustrated in
Figure 4, in which the same cue was inserted using [Rec] rather than
[Track].
Figure 5.
Channel 4 creates a track from cue after 1.1 until a prerecorded level
interrupts it.
Cue 1 Cue 1.1 Cue 2 Cue 3 Cue 4 Cue 5
Channel 1 50
Channel 2
Channel 3
Channel 4
Channel 5
50 50 50
FF FF
FF
50 50 50
Expression 2.0
25 00
FF 00
FF 00
FF 00