Appendix Adip Switch Settings - ETC Expression 2.0 User Manual

DIP Switch settings
appendix a
dip switch settings
DIP switches are located on the back panel of the console . To change
the DIP switch settings, remove the clear panel, and set switches .
Expression reads DIP switch settings when console is turned on .
Therefore, if you change any settings, you must reboot console to
initialize new settings .
Switches in the down position are off; switches in the up position are
on . Expression does not use DIP switches A1, A2, and A5 . DIP switch
B8 must be Off for the system to boot.
Messages
ETC messages
ARRI messages
CRT AC line frequency
60 Hz
50 Hz
Manual readback
None
32 channels
64 channels
96 channels
192 channels
A3
Off
On
A4
Off
On
A6 A7 A8
Off Off Off
Off Off On
Off On Off
Off On On
On Off Off
A-1