ETC Expression 2.0 User Manual page 23

Chapter 2 Installation 2 - 7
Boot option selection
Two system boot options are available, fast and full boot . The full boot
performs a series of hardware tests . If the tests find any hardware
problems, Expression displays a message indicating so . The fast boot
option skips the hardware test and therefore boots faster .
Both boot options test the memory that holds show information . Expres-
sion displays a message during either boot option if it detects that the
memory has been corrupted.
You will probably want to run the console with the fast boot option for
convenience . However, you should select the full boot option periodi-
cally to run the console's hardware tests.
The boot option you select will perform tests the next time you turn
console on . To select a boot option, follow these steps:
1. Press [Set Up] to display the Set Up Menu.
2. Select 6, System Settings, and press [Enter].
3. Select 12, Full/fast boot test, and press [Enter].
4. Enter 0 for full boot test or 1 for fast boot test. Then press [Enter].