Entering Numbers Of Channels And Dimmers - ETC Expression 2.0 User Manual

Chapter 3 Entering softpatch and system settings

Entering numbers of channels and dimmers

You may want to enter the number of available channels and dimmers
before you begin custom patching . To do so, follow these steps:
1. Press [Set Up].
2. Select 6, System Settings, and press [Enter].
3. Select 4, Customize Channels, and press [Enter] .
4. Enter the total number of required channels, up to 250, and press
[Enter].
5. Select 7, Customize Dimmers, and press [Enter] .
6. Enter the total number of required dimmers, up to 512*, and press
[Enter] .
*Or 1,024 dimmers if you have the optional second DMX512 connector.
3 - 5