Using Groups To Modify Cues Or Submasters In Blind - ETC Expression 2.0 User Manual

Chapter 5 Learning advanced techniques

Using groups to modify cues or submasters in Blind

When you modify a cue or a submaster using a group in Blind, follow
these steps:
1. Press [Blind] . Expression prompts you for a cue number.
2. Enter cue number, or press [Sub] and enter a submaster number to
display the cue or submaster you want to modify.
3. Press [Group] to indicate that the next number entered will be a
group.
4. Enter group number.
5. Press [Full] to set group channels to their full recorded levels, or
press [At] and enter a level to set them at a percentage of the
group's look.
Or, press [Enter] to impose only the group's proportions on the
currently set levels.
The fader wheel adjusts levels in group's proportions.
6. Press [Rec], [Enter] to record the modified cue or submaster.
5 - 27