Autoload - ETC Expression 2.0 User Manual

8 - 4

Autoload

The autoload feature lets you load both fader pairs simultaneously . You
can record any cues in an autoload . For example, you might want to run
a regular crossfade cue in one fader and an effects cue in the other.
With autoloads you can playback the same effects cue at different rates
during different times in the show.
Expression lets you store up to 25 autoloads; they are not cues and are
not included in the 400 cue limit.
You can record autoloads in either Stage or Blind . For instructions on
creating autoloads, see page 5 - 44 and 5 - 45 . For instructions on taking
manual control of autoloads, see page 5 - 46.
Playing back autoloads
To playback a recorded autoload:
1. Press [Autoload].
2. Enter autoload number you want to playback .
3. Press either [Go] key .
Example
[Autoload] [1] AB fader [Go] plays back autoload 1 through the AB fader.
Expression 2.0