Installing Printer - ETC Expression 2.0 User Manual

2 - 10

Installing printer

Expression supports both serial and parallel printers . Printer functions
are described in Chapter 6, Using print and disk options. Pinout and
connector specifications are on the next page . Follow these steps to
install printer:
1. Parallel printers: Insert parallel printer cable into connector labeled
Parallel on the back panel of the console.
Serial printers: Insert serial printer cable into connector labeled
Serial on the back panel of the console . Set printer protocol at 1200
baud, 8 data bits, 2 stop bits, no parity.
2. Insert opposite end of printer cable into printer.
3. With the console on, press [Set Up] .
4. Select 6, System Settings, and press [Enter].
5. Select 10, Serial/Parallel Printer, and press [Enter] .
6. Enter 0 to select serial printer or 1 to select parallel printer, and
press [Enter].
7. Turn printer power switch on, and verify that printer is on line.
Expression 2.0