Flash - ETC Expression 2.0 User Manual

8 - 34 Expression 2.0

Flash

[Flash] pushes selected channels to a level of either zero or full depend-
ing on their level when you press [Flash] . If selected channels are set at
a level from one to 50 percent, press [Flash] to flash them to full . If
selected channels are set at a level from 51 percent to full, press [Flash]
to flash them to zero . Channels remain at flash level until you release the
key.
One application of [Flash] is identifying which lamps are controlled by a
channel . To do so, select desired channel, and press [Flash].