Copying Groups - ETC Expression 2.0 User Manual

5 - 26

Copying groups

Once you have created a group, you may copy it and give it a name. This
can be helpful if you want to create a group based on one you have
already recorded. You can copy groups in Stage or Blind modes.
Follow these steps to copy a group:
1. Press [Blind] or [Stage]. You can copy a group in either mode.
2. If you are working in Blind mode, press [Group], then enter the
number of the group you want to copy. Or, if you are working in
Stage mode, press [Group], enter the number of the group you want
to dcopy, then press [Go].
3. In either Stage or Blind, once the group is displayed, press [Rec]
[Group], the number of the new group, and [Enter]. The new group
will be recorded; the original group will not be affected.
Copying group keystrokes:
Key
[Blind] or [Stage]
[Group] [1] or
[Group] [1][Go]
[Rec] [Group] [2]
Action
Selects operating mode.
Displays selected group.
Copies Group 1 as Group 2.
Expression 2.0