Designer's Worksheet - ETC Expression 2.0 User Manual

Chapter 7 Accessories

Designer's Worksheet

Designer's Worksheet gives you control of the console from any remote
location such as in the house, on the set, or backstage . The Designer's
Worksheet is a digitizer tablet that emulates the console face panel in
addition to providing user definable regions . All functions may be se-
lected using a stylus.
Three digitizer templates are available . The correct template for your
worksheet depends on your digitizer's size and your console's memory .
12 x 12 inch digitizer
If you own a 12 x 12 inch digitizer and do not have expanded memory,
you can program up to 125 regions, and you can use the digitizer to
control submasters and faders.
12 x 12 inch digitizer (with expanded memory)
If you own a 12 x 12 inch digitizer and have expanded memory, you can
program up to 640 regions; and you can select one of two digitizer
layouts. One layout provides control of submasters and faders, while the
other deletes the submasters for increased workspace area.
17 x 12 inch digitizer tablet (requires expanded memory)
You must have expanded memory to use 17 x 12 inch digitizer . The
larger digitizer allows you to program up to 640 regions; you cannot
control submaster pots with the 17 x 12 inch digitizer.
If you have not yet installed your Designer's Worksheet, see Chapter 2,
Installation. When your worksheet is installed and turned on, you should
see the message DWS On on the screen.
7 - 5