Dmx Personality; Multi-Channel Configuration - ETC ArcSystem Pro Multi-Cell RDM Manual

ETC Installation Guide
ArcSystem Pro Multi-Cell
DMX Personality
ArcSystem multi-cell fixtures support two DMX personality types: single-channel and multi-channel.
The single-channel personality controls all LEDs with a single DMX address. The multi-channel
personality controls individual LEDs or pairs of LEDs with up to four channels as shown below.
Note:
specify the DMX start address and the channels will be addressed automatically in the order
shown.

Multi-channel Configuration

1 2
Two-Cell
1 2
3 4
Four-Cell
Square/Round
ArcSystem Pro Multi-Cell
You cannot manually assign DMX addresses to each channel in a fixture. You can
1 2 3
Four-Cell Linear
1 1 2
3 3 4
Eight-Cell
4
2
4
Page 20 of 24 ETC