Download Print this page

Advertisement

Quick Links

ETC Assembly Guide
XDLT Lens Tubes
Overview
This Assembly Guide describes the placement of lenses in XDLT Lens Tubes, and describes how to
safely clean the lenses.
Lens Markings and Positions
Each lens has a colored dot at its edge on the side of the lens facing the front of the fixture. The
images below show the position of lenses within the lens tubes. Locations of lenses are also marked
on the inside of the lens tube housing.
14° XDLT lens tube
Lens dot color = Red
7462A2004-K
26° XDLT lens tube
Lens dot color = White
7462A2006-K
Corporate Headquarters
Global Offices
New York, NY
Web
© 2021 Electronic Theatre Controls, Inc.
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
7462M2500 Rev A Released 2021-02
n
Middleton, WI, USA
n
|
London, UK
Rome, IT
|
|
Orlando, FL
Los Angeles, CA
etcconnect.com
|
Support
support.etcconnect.com
19° XDLT lens tube
Lens dot color = Green
7462A2005-K
36° XDLT lens tube
Lens dot color = Blue
7462A2007-K
|
+1 608 831 4116
|
|
|
Holzkirchen, DE
Paris, FR
Hong Kong
|
Austin, TX
|
Contact
etcconnect.com/contactETC
|
Trademark and patent info:
etcconnect.com/ip
|
|
Dubai, UAE
Singapore

Advertisement

loading
Need help?

Need help?

Do you have a question about the XDLT and is the answer not in the manual?

Questions and answers

Summary of Contents for ETC XDLT

  • Page 1 ETC Assembly Guide XDLT Lens Tubes Overview This Assembly Guide describes the placement of lenses in XDLT Lens Tubes, and describes how to safely clean the lenses. Lens Markings and Positions Each lens has a colored dot at its edge on the side of the lens facing the front of the fixture. The images below show the position of lenses within the lens tubes.
  • Page 2 ETC Assembly Guide Lens Tubes Clean Glass Lenses (14°,19°, 26°, and 36° Lens Tubes) WARNING: Do not use ammonia-based cleaners or other harsh commercial cleaners. Clean lens and reflector only as directed. Commercially available glass cleaning agents should be avoided as they may contain ammonia, other harsh chemical detergents or abrasive agents.