Enable Override Settings; Option 1 - User Interface - Ruckus Wireless SmartCell Gateway 200 Reference Manual

SNMP Configuration and Standard MIB and OID
SNMP Agent for APs

Enable Override Settings

If you want to set up a different policy for a specific AP, you need to enable the
override option for a particular AP or for a AP Group.

Option 1 - User Interface

Using the controller interface navigate to Configuration > Access Points. Click on
the AP Configuration > AP SNMP Options and enable the Override option for a
particular AP as seen in Figure 8.
Figure 8. Setting the Override option for a particular AP
52
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A