Network - Motorola RFS7000 Reference Manual

17-24 Motorola RF Switch CLI Reference Guide

17.1.19 network

DHCP Config Commands
Sets the network pool's IP address. This address maps the current DHCP pool with a
specific network.
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
network [A.B.C.D|A.B.C.D/M]
Parameters
network [A.B.C.D|A.B.C.D/M]
Usage Guidelines
Ensure a VLAN interface (with specific network/subnet) exists on the switch before
mapping a DHCP pool to a particular network.
Example
RFSwitch(config-dhcp)#network
RFSwitch(config-dhcp)#
Sets the network number and mask
• A.B.C.D – Network number in dotted
decimal format
• A.B.C.D/M – Network number and mask
2.2.2.0/24