10.1.9 show
Crypto Map Config Commands
Displays current system information running on the switch
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
show <paramater>
Parameters
?
Example
RFSwitch(config-crypto-map)#show ?
access-list
aclstats
alarm-log
arpi
autoinstall
banner
boot
clock
SWITCH NOTE: The following commands display only for
RFS6000:
• arpi
• espi
• power
• tags
The following commands display only for RFS7000 and WS5100:
• port-channel
• static-channel-group
Displays all the parameters for which information can be
viewed using the show command
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the system
ARPI Configuration
autoinstall configuration
Display Message of the Day Login banner
Display boot configuration.
Display system clock
Crypto-map Instance
10-15