Motorola RFS7000 Reference Manual page 664

20-76 Motorola RF Switch CLI Reference Guide
nac-server ()
[primary|secondary|time
out]
Configure a NAC server IP address and an optional
authentication port number
• [primary|secondary] [EAP Server IP Address|RADIUS Key]
– Primary server or secondary server's IP address
• A.B.C.D (auth-port) – Set an EAP server IP
address and EAP server authentication port
(default: is 1812)
• RADIUS Key (0|2|Shared) – Create a Radius
server shared secret, up to 127 characters
• 0 – Password is specified as
UNENCRYPTED
• 2 – Password is encrypted with
password-encryption secret
• Shared – Configures a NAC server
shared secret
• timeout <1-300> – Sets the time the switch waits for a
response from the RADIUS server before retrying. This is
a global setting for boththe primary and secondary
servers.
NOTE: The
RFSwitch(config-wireless)# nac-
server timeout<*> retransmit<*>
than what is defined for an MU's timeout and retries. If
the MU's time is less than the server's, a fallback to the
secondary server will not work.
should be less