Motorola RFS7000 Reference Manual page 276

5-60 Motorola RF Switch CLI Reference Guide
Parameters
access-group
authenticate
authentication-key
autokey
broadcast
broadcastdelay
Controls NTP access
• peer – Provides full access
• query-only – Allows only control queries
• serve – Provides server and query access
• serve-only – Provides only server access
• <1-99> – Defines the standard IP access list
• <1300-1999> – Standard IP access list
(expanded range)
Authenticates time sources
Defines the authentication key for trusted time sources
• md5 – Sets MD5 authentication
• Key – Authentication key
Enables the NTP autokey authentication scheme
• client-only – The switch is a client to other trusted-hosts
in the autokey group
• host – Configures the switch as a trusted host
Configures the NTP broadcast service
• client – Listens to NTP broadcasts
• IP Address – Defines the destination
broadcast IP address
• key <1-65534> – Sets the broadcast key ID
• destination – Configures broadcast destination address
• IP Address – Defines the destination
broadcast IP address
• version <1-4> – Sets the NTP version number
Defines the estimated round-trip delay
• <1-999999> – Sets the round-trip delay in microseconds