Motorola RFS7000 Reference Manual page 620

20-32 Motorola RF Switch CLI Reference Guide
ex-ops {}
Example
RFSwitch(config-wireless)#ids anomaly-detection tkip-
countermeasures enable
RFSwitch(config-wireless)#
Sets values related to the detection of excessive operations
on the RF network
• 80211-replay-fails – 802.11 replay check failure
• all – Changes for all types of excessive operations
• association-requests – 802.11 authentication and
association requests
• authentication-fails – Failure to authenticate with
servers (RADIUS/Kerberos)
• crypto-replay-fails – TKIP/CCMP IV replay check failure
• decryption-fails – Decryption failures
• disassociations – Disassociation and deauthentication
frames
• eap-naks – Excessive EAP-NAKs
• eap-starts – EAP (802.1x) start frames
• probe-requests – Probe request frames
• unassoc-frames – Frames from unassociated stations
• filter-ageout<0-86400> – Sets the number of
seconds mobile units will be filtered out
• threshold (mu|radio|switch) <0-65535> –
Sets the threshold allowed in the detection
window
mu – Uses the threshold for monitoring
on a per mobile unit basis
radio – Uses the threshold for
monitoring on a per radio basis
switch – Uses the threshold for
monitoring at the switch level