19.1.14 server
Radius Configuration Commands
Configures server certificate parameters used by a RADIUS server. The server certificate
is a part of a trustpoint created using
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
server (trust-point)(name)
Parameters
trust-point
Usage Guidelines
Create a trustpoint using (crypto-pki-trustpoint
the trustpoint using crypto-pki commands. Refer to
information.
Example
RFSwitch(config-radsrv)#server trust-point TestTP
RFSwitch(config-radsrv)#
crypto on page 5-21.
Sets the trustpoint configuration
• name – Existing trustpoint name
. The server certificate must be created under
)
Radius Server Instance
crypto on page 5-21
19-31
for more