Example-Creating A Group - Motorola RFS7000 Reference Manual

19-20 Motorola RF Switch CLI Reference Guide
redundancy-group
redundancy-history
redundancy-members
running-config
securitymgr
sessions
snmp
snmp-server
sole
spanning-tree
startup-config
tags
terminal
timezone
upgrade-status
users
version
wireless
wlan-acl
RFSwitch(config-radsrv-group)#
19.1.7.13 Example–Creating a Group
The
(config-radsrv-group)
1. Create a group called Sales in the local RADIUS server database.
RFSwitch(config-radsrv)#group sales
2. Check the RADIUS user group's configuration.
RFSwitch(config-radsrv-group)#?
RADIUS user group configuration commands:
3. Use a
RFSwitch(config-radsrv-group)#policy ?
day
time Configure time of access policy for this group
vlan VLAN id for this group
wlan Configure wlan access policy for this group
RFSwitch(config-radsrv-group)#policy day weekdays
RFSwitch(config-radsrv-group)#policy time start 12 30 end 15 30
command to configure group policies for the group created in Step 1.
policy
Day of access policy configuration
Display redundancy group parameters
Display state transition history of the
switch.
Display redundancy group members in detail
Current Operating configuration
Securitymgr parameters
Display current active open connections
Display SNMP engine parameters
Display SNMP engine parameters
Smart Opportunistic Location Engine
Configuration
Display spanning tree information
Contents of startup configuration
Tags/Assets (passive, active, wi-fi, uwb)
Information
Display terminal configuration parameters
Display timezone
Display last image upgrade status
Display information about currently logged
in users
Display software & hardware version
Wireless configuration commands
wlan based acl
sub-instance is explained in the example below: