Bootfile - Motorola RFS7000 Reference Manual

17-4 Motorola RF Switch CLI Reference Guide

17.1.2 bootfile

DHCP Config Commands
Assigns a bootfile name for the DHCP configuration on the network pool
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
bootfile <filename>
Parameters
bootfile <filename>
Usage Guidelines
Use the
bootfile
image name used for booting the bootp clients (DHCP clients). Only one boot file is allowed
per pool.
Use
[no] bootfile
the bootfile command as only one bootfile exists per pool. The command
removes the exisitng command from the pool.
Example
RFSwitch(config-dhcp)#bootfile bootexample.txt
RFSwitch(config-dhcp)#
Sets the boot image for BOOTP clients. The file
name can contain letters, numbers, dots and
hyphens. Consecutive dots and hyphens are not
permitted.
command to specify the boot image. The boot file contains the boot
command to remove the bootfile. Do not use the <file name> with
[no] bootfile