17-8
Motorola RF Switch CLI Reference Guide
17.1.4 client-identifier
DHCP Config Commands
Assigns a name to the client-identifier. A client identifier is used to reserve an IP address
for a DHCP client
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
client-identifier <ascii string>
Parameters
client-identifier
<ascii string>
Example
RFSwitch(config-dhcp)#client-identifier testid
RFSwitch(config-dhcp)#
Prepends a null character. Use
beginning (a single
\
at the
\\0
in the input is ignored)