Motorola RFS7000 Reference Manual page 596

20-8 Motorola RF Switch CLI Reference Guide
20.1.4 ap
Wireless Configuration Commands
Defines the name and location of the access port
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
ap [<AP index>|<MAC Address>][location|name]
Parameters
AP Index
MAC Address
Example
RFSwitch(config-wireless)#ap 00-15-70-14-FE-C4 location 5th Floor
SalesUnit
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#ap 1 location BLR
RFSwitch(config-wireless)#
Sets a single AP index. Use the
command to view the AP's index value.
• location – Defines the location description of the AP
• name – Sets the name of this AP
Lists an AP's MAC address. Use the
command to view the AP's index.
show wireless ap
show wireless ap
RMZ Ecospace