Motorola RFS7000 Reference Manual page 451

Parameters
permit {ip}
{source/source-mask |
host source | any}
{destination/destination-
mask | host destination |
any}
[log]
[rule-precedence access-
list-entry precedence]
Use the permit command to allow IP packets
• permit – Allows IP packets
• {ip} – Specifies the IP (to match to any protocol)
• {source/source-mask | host source | any} – The source
is the source IP address of the network or host (in
dotted decimal format). The source-mask is the
network mask. For example, 10.1.1.10/24 indicates
the first 24 bits of the source IP are used for matching.
• any is an abbreviation for source IP of 0.0.0.0 and
source-mask bits equal to 0
• host is an abbreviation for exact source (A.B.C.D)
and source-mask bits equal to 32
• {destination/destination-mask | host destination |
any} – Sets the destination host IP address or
destination network address
• [log] – Generates log messages when the packet
coming from the interface matches the ACL entry. Log
messages are generated only for router ACLs.
• [rule-precedence access-list-entry precedence] –
Sets an integer value between 1-5000. This value sets
the rule precedence in the ACL.
Extended ACL Instance 14-19