Mobility - Motorola RFS7000 Reference Manual

20-38 Motorola RF Switch CLI Reference Guide

20.1.25 mobility

Wireless Configuration Commands
Sets mobility parameters
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
mobility(enable|local-address|max-roam-period|peer)
mobility local-address (IP Address)
mobility max-roam-period<1-15>
mobililty peer (IP Address)
Parameters
enable
local-address <IP
address>
max-roam-period<1-
300>
peer <Peer IP Address>
Example
RFSwitch(config-wireless)#mobility enable
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#mobility local-address 12.12.12.1
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#mobility max-roam-period 10
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#mobility peer 157.208.235.108
RFSwitch(config-wireless)#
Enables mobility globally
Sets the local address for mobility
• A.B.C.D – IP address of A.B.C.D format
Sets the Max Roam Period for a mobile unit (in seconds)
Adds a peer to this mobility region
• A.B.C.D – IP address of the Peer