Motorola RFS7000 Reference Manual page 636

20-48 Motorola RF Switch CLI Reference Guide
bss (<1-4>|add-
wlans|auto) WLAN
channel-power
(indoor|outdoor)
(<1-2000>|acs|random)
<4-20>
client-bridge
[enable|
mesh-timeout <2-200>|
ssid (SSID name)]
coordinates
<-65535-65535>
<-65535-65535>
Maps WLANs to radio BSSIDs
• <1-4>– Sets the BSS where WLANs are mapped
• add-wlans – Adds new WLANs to existing radios. The
other WLANs on the radios are left as is.
• auto–Sets the automatic assignment of a BSS. The user
selects WLANs, and the system assigns them to a BSS
automatically.
• WLAN–Defines a list (1,3,7) or range (3-7) of WLAN
indices. When a BSS is also specified, the first WLAN is
used as the primary WLAN. When the auto option is
used, the system automatically assigns the first four
WLANs as primaries on their respective BSSIDs.
Sets the location, channel and transmit power level
• indoor – Defines an indoor location
• outdoor – Defines an outdoor location
• <1-2000> – Sets the channel number
• acs – Enables ACS (auto channel selection). A radio will
scan for the least congested channel at startup or switch
reconfiguration.
• random – Random channel selection
• <4-20> – Sets the power in dBm
Defines client bridge settings
• enable – Enables client-bridge functionality on radio
• mesh-timeout [1|<2-200>] – Sets the client bridge link
timeout
• ssid (SSID name) – Defines the ESSID of the WLAN
Configures the location of this radio in terms of x.y.z
coordinates
• <-65535-65535> – Sets the X coordinate
• <-65535-65535> – Sets the Y coordinate
• <-65535-65535> – Sets the Z coordinate