17.1.16 lease
DHCP Config Commands
Sets a valid lease time for the IP address used by DHCP clients in the network pool
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
lease [{<0-365> <0-23> <0-59>}|infinite]
Parameters
lease [
{<0-365> <0-23> <0-59>}
|infinite]
Usage Guidelines
If lease parameter is not configured on the DHCP network pool, the default value is used.
The default value of the lease is 24 hours.
The lease vlaue for DHCP host pool is infinite.
Example
RFSwitch(config-dhcp)#lease 20 12 30
RFSwitch(config-dhcp)#
Sets the lease time for an IP address
• <0-365> –Sets the lease period in days.
Days can be made as 0 only when hours
and/or mins are greater than 0.
• <0-23> – Sets the hours for the lease
period. Hours can be 0 only when days
and/or minutes are configured with a
value greater than 0.
• <0-59> – Sets the minutes for the lease
period. Minutes can be 0 only when
days and/or hours are configured with a
value greater than 0.
• infinite – Sets the lease period as infinite.
DHCP Server Instance
17-21