Management - Motorola RFS7000 Reference Manual

12-14 Motorola RF Switch CLI Reference Guide

12.1.10 management

Interface Config Commands
Sets the selected interface as management interface. It can only be used on a VLANx
interface. The TFTP/FTP server providing the switch its config file at startup must be
accessible via this interface.
VLAN 1 is the default management interface for the switch.
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
management
Parameters
None
Usage Guidelines
The management privilege can be set only on a L3 interface. Use this command along with
the
(config) management secure
is restricted to the management VLAN only
Refer to
Example
RFSwitch(config)#interface vlan 1000
RFSwitch(config-if)#management
RFSwitch(config-if)#
management on page 5-58
in the config mode. This ensure management access
for
(config) management secure
configuration.