Motorola RFS7000 Reference Manual page 449

14.1.7 no
Extended ACL Config Commands
Negates a command or sets its defaults
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
no(deny|mark|permit)
Negates all the syntax combinations used in the deny,
configure the Extended ACL
Parameters
deny
mark
permit
Usage Guidelines
Removes an access list control entry. Provide the rule-precedence value when using the
no command.
Example
RFSwitch(config-ext-nacl)#no mark 8021p 5 tcp 192.168.2.0/24 any
rule-precedence 10
RFSwitch(config-ext-nacl)#
RFSwitch(config-ext-nacl)#no permit ip any any rule-precedence 10
RFSwitch(config-ext-nacl)#
RFSwitch(config-ext-nacl)#no deny icmp any any rule-precedence 10
RFSwitch(config-ext-nacl)#
Specifies packets to reject
Specifies packets to mark
Specifies packets to forward
Extended ACL Instance
mark and permit designations to
14-17