Motorola RFS7000 Reference Manual page 266

5-50 Motorola RF Switch CLI Reference Guide
4. Associate the DHCP class, created in Step 1 with the pool created in Step 3. The switch
supports the association of only 8 CDHCP classes with a pool.
RFSwitch(config-dhcp)#class RFSwitchDHCPclass
RFSwitch(config-dhcp-class)#
5. The switch leads you to a new mode (config-dhcp-class). Use this mode to add an
address range used with the DHCP class associated with the pool.
RFSwitch(config-dhcp-class)#address range 11.22.33.44
Example
RFSwitch(config)#ip access-list extended TestACL
RFSwitch(config-ext-nacl)#
RFSwitch(config)#ip access-list standard TestStdACL
RFSwitch(config-std-nacl)#
RFSwitch(config)#ip dhcp pool TestPool
RFSwitch(config-dhcp)#
RFSwitch(config)#ip dhcp class TestDHCPclass
RFSwitch(config-dhcpclass)#