Show - Motorola RFS7000 Reference Manual

23-10 Motorola RF Switch CLI Reference Guide

23.1.8 show

ESPI Config Commands
Displays current system information
Supported in the Following Platforms:
• RFS6000
Syntax
show <parameters>
Parameters
?
Example
RFSwitch(config-espi)#show ?
access-list
aclstats
alarm-log
arpi
autoinstall
banner
boot
clock
commands
crypto
debugging
dhcp
environment
espi
file
ftp
history
interfaces
ip
ldap
licenses
SWITCH NOTE: This command is not supported in:
• WS5100
• RFS7000
Displays the parameters for which information can be
viewed using the show command
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the system
ARPI Configuration
autoinstall configuration
Display Message of the Day Login banner
Display boot configuration.
Display system clock
Show command lists
encryption module
Debugging information outputs
DHCP Server Configuration
show environmental information
ESPI Configuration
Display filesystem information
Display FTP Server configuration
Display the session command history
Interface status
Internet Protocol (IP)
LDAP server
Show any installed licenses