Dns-Server - Motorola RFS7000 Reference Manual

17-14 Motorola RF Switch CLI Reference Guide

17.1.9 dns-server

DHCP Config Commands
Sets the DNS server's IP address available to all DHCP clients connected to the pool. Use
the
no dns-server
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
dns-server <ip address1> <ip address2> <ip address3> .....
<ip address8>
Parameters
dns-server <IP address>
Usage Guidelines
For DHCP clients, the DNS server's IP address maps the host name to an IP address. DHCP
clients use the DNS server's IP address based on the order (sequence) configured.
Example
RFSwitch(config-dhcp)#dns-server 2.2.2.222
RFSwitch(config-dhcp)#
command to remove the DNS server list.
Configures the DNS server's IP address
• <IP address> – Sets the server's IP address