Motorola RFS7000 Reference Manual page 577

group-attr
group-filter
group-membership
net-timeout
Usage Guidelines
Use the login filter and group filter values (described in the example below) for all LDAP
configuration scenarios
Use the parameter to enter the password for the active directory user mentioned
passwd
in bind -dn. This is used for the initial login to the active directory.
The and
passwd-attr
example:
Example
RFSwitch(config)#ldap-server primary host xxx.xxx.x.xx port 389
login (sAMAccountName=%{Stripped-User-Name:-%{User-Name}}) bin
d-dn cn=admin,ou=wid,dc=symbolTech,dc=local base-dn
ou=wid,dc=symbolTech,dc=local passwd SYMBOL@123 passwd-attr
UserPassword
group-attr cn group-filter (|(&(objectClass=group)(member=%{Ldap-
UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{L
dap-UserDn}))) group-membership radiusGroupName net-timeout 1
RFSwitch(config)#
Specifies the group attribute used by the LDAP server
Specifies the group filters used by the LDAP server
Specifies the Group Member Attribute sent to the LDAP
server when authenticating users
Enter a timeout the system uses to terminate the
connection to the RADIUS Server if no activity is detected
group-membership
Radius Server Instance
is retained as described in the following
19-25