Example - Denying Udp Based Traffic; Example - Denying Icmp Based Traffic - Motorola RFS7000 Reference Manual

Rfs series wireless lan switches

Hide thumbs Also See for RFS7000:

Table of Contents

14.1.2.3 Example - Denying UDP Based Traffic

The following example denies UDP traffic with a source port range between 20 - 23 (from

the source subnet to destination subnet):

RFSwitch(config-ext-nacl)#deny udp 192.168.1.0/24 192.168.2.0/

24 range 20 23

RFSwitch(config-ext-nacl)#permit ip any any

RFSwitch(config-ext-nacl)#

The following example denies ICMP traffic from any source to any destination. The

keyword any is used to match:

any source or destination IP address.

RFSwitch(config-ext-nacl)#deny icmp any any

RFSwitch(config-ext-nacl)#permit ip any any

RFSwitch(config-ext-nacl)#

Extended ACL Instance

Rfs6000 Ws5100