Chapter 3. User Exec Commands; User Exec Commands; Clear - Motorola RFS7000 Reference Manual

Logging in to the switch places you within the USER EXEC command mode. Typically, a
login requires a user name and password. You have three login attempts before a
connection attempt is refused. USER EXEC commands (available at the user level) are a
subset of the commands available at the privileged level. In general, USER EXEC
commands allow you to connect to remote devices, perform basic tests and list system
information.
To list available USER EXEC commands, use ? at the command prompt. The USER EXEC
prompt consists of the device host name followed by an angle bracket (>). The default host
name is generally "WLAN Module". Use the GLOBAL CONFIG command to change the
hostname.

3.1 User Exec Commands

Table 3.1 summarizes USER EXEC commands:
Command

clear

clrscr
cluster-cli
debug
disable
User Exec Commands
Table 3.1 User Exec Mode Command Summary
Description
Resets the command to the previous configuration
Clears the display screen
Displays the cluster context
Displays debugging functions
Turns off (disables) the privileged mode command set
Ref.
page 3-3
page 2-2
page 3-5
page 3-6
page 3-8