Self-Heal - Motorola RFS7000 Reference Manual

20.1.33 self-heal

Wireless Configuration Commands
Configures self healing values
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
self-heal(interference-avoidance|neighbor-recovery)
self-heal interference-avoidance(enable|hold-time<0-65535>|
retries<0.0-15.0>)
self-heal neighbor-recovery(action|enable|neighbors|run-neighbor-
detect)
self-heal neighbor-recovery action(both|none|open-rates|raise-
power) radio(<1-1000>|RADIO)
self-heal neighbor-recovery neighbors<1-1000>(<1-1000>|RADIO)
Parameters
interference-avoidance
enable
hold-time<0-65535>
retries<0.0-15.0>
neighbor-recovery
Interference avoidance configuration
Enables/disables interference avoidance
The number of seconds to disable interference avoidance
after a detection. This prevents a radio from changing
channels continuously. Set the hold-time between 0-65535
seconds.
Defines the average number retries (0-15) causing a radio to
re-run auto channel selection
Invokes neighbor recovery configuration commands
Wireless Instance 20-55