Motorola RFS7000 Reference Manual page 706

22-16 Motorola RF Switch CLI Reference Guide
Parameters
index <1-100>
Usage Guidelines
Use
(no) filter <index> [options]
Example
RFSwitch(config-arpi)#filter 10 action allow
RFSwitch(config-arpi)#
Enter a single tag-filter index. Select a value between
<1-100>
• action – Configures tag filter action
• allow – Allows/permits RFID tag matching
the filter
• deny – Rejects/Denies RFID tag matching
the filter
• length <1-128> – Configures length of tag filter. Select a
value between <1-128> for the number of bits to
compare against tag mask
• mask <name>– Configures tag filter mask
• memory-bank – Configures tag memory bank
• epc – EPC memory bank
• tid – TID memory bank
• uid – UID memory bank
• name – Configures name of tag filter
• offset <0-32> – Configures an offset into tag memory.
Offsets the first (MSB) location of the specified memory
bank against which to compare tag mask.
to negate all configured RFID tag filters