20-14
Motorola RF Switch CLI Reference Guide
20.1.8 ap-udp-port
Wireless Configuration Commands
Configures the UDP port for layer 3 adoption of APs. You also need to configure the DHCP
server serving the APs with the same parameter.
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
ap-udp-port <1-65535>
Parameters
<1-65535>
Example
RFSwitch(config-wireless)#ap-udp-port 20
RFSwitch(config-wireless)#
Sets the port number for layer 3 adoption of APs