Motorola RFS7000 Reference Manual page 644

20-56 Motorola RF Switch CLI Reference Guide
action
(both|none|open-rates|
raise-power)
radio (<1-1000>|RADIO)
enable
neighbors<1-1000>
(<1-1000>|RADIO)
run-neighbor-detect
Example
RFSwitch(config-wireless)#self-heal interference-avoidance enable
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#self-heal interference-avoidance hold-
time 600
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#self-heal neighbor-recovery enable
Note: reducing the configured transmit power of radios will ensure
that there is room to increase power when a neighbor fails
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#self-heal neighbor-recovery neighbors 1 1
RFSwitch(config-wireless)#
Defines the radio's self healing action when neighbors are
detected as down
• both – Raises the power to max and open all rates
• none – No action taken
• open-rates – Opens all rates
• raise-power – Raises the power to maximum
• radio – Modifies the action for specified radio(s)
• <1-1000> – Sets a single radio index
• RADIO – Defines a list (1,3,7) or range (3-7) of radio
indices
Monitors access ports and attempts to increase coverage
on a detected failure
Adds a radio as a neighbor
Disassociates all mobile units, clears current neighbors and
runs neighbor detection