Radius-Server - Motorola RFS7000 Reference Manual

5.1.30 radius-server

Global Configuration Commands
Enters the RADIUS server mode, the system prompt changes from the default config mode
to the RADIUS server mode
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
radius-server(host|key|local|retransmit|timeout)
radius-server host (A.B.C.D)
radius-server key(0|2| LINE)
radius-server local
radius-server retransmit <0-100>
radius-server timeout<1-1000>
Parameters
host
key
local
NOTE:
radius-server local
context. For more details see
Specifies a RADIUS server
• A.B.C.D – Defines the IP address of RADIUS server
Sets the Encryption key shared with the RADIUS servers
• 0 – Password is specified UNENCRYPTED
• 2 – Password is encrypted with password-encryption
secret
• LINE – Text of shared key, upto 127 characters
Configures local RADIUS server parameters. This takes you
to a new
Server Instance
Global Configuration Commands
mode takes you to the RADIUS server
Radius Server Instance on page
config-radius-server
for more details.
5-65
19-1.
context. Refer to Radius